| Processor |
 |
|
Intel
Pentium II Processor (233Mhz-333MHz) |
| Coprocessor |
|
Internal
Coprocessor of Pentium Processor |
| Intel
Chipset |
|
Intel's 440LX AGPset
with I/O subsystems. |
| Bus
Architecture |
|
32-bit PCI
Bus and 16-bit ISA Bus Compatible |
| Expansion
Slots |
|
2 x 32-bit PCI slots |
|
2 x 16-bit ISA slots |
|
1 x 32-bit AGP slot |
| AGP
Connetor |
|
Accelerated
Graphics Port Connector Supports AGP 66MHz/133MHz (Sideband)
3.3V Device. |
| Cache
Memory |
|
512K
or 256K Pipelined Burst Level 2 cache in Pentium II CPU
cartridge. |
| System
Memory |
|
Two
168-pin DIMM Sockets to Support (8, 16, 32, 64, or 128MB 3.3V
DRAM or SDRAM) |
|
ECC/Parity
Support |
|
Total
Memory Capacity: 256MB Max. |
| Wake-On-LAN |
|
Support
Wake-On-LAN standard by the Intel-IBM Advanced Manageability
Alliance |
| On
Board Audio |
|
Sound
BlasterTM16/PRO
CompatibleISA, Microsoft Direct SoundTM
3D DirectX 5.0 Compatible 3D PnP Audio Controller |
| On
Board Super I/O |
|
3
Audio Ports |
|
1
Floppy Port (up to 2.88MB, Japan 3 Mode Floppy Supported) |
|
2
Serial Ports (16550 Fast UART Compatible) |
|
1
Parallel Port (ECP, EPP Port) |
|
2
USB Ports |
|
1
PS/2 Keyboard Port, 1 PS/2 Mouse Port |
|
1
Game Port |
|
IrDA
TX/RX Header (Optional) |
| On
Board PCI IDE |
|
Dual
Channel UltraDMA/33 Bus Master IDE ports (Support up to 4 IDE
devices and LS-120MB Floppy Drive) Support:
 | PIO Mode 3 & 4
| DMA Mode 2
| U-DMA/33 |
| |
|
|
Greater
Than 8.4GB HD, ATAPI IDE CD-ROM Support. |
| Power
Supply Connector |
|
3V,
5V and 12V 20-Pin ATX Power Connector. Soft Power Support |
| BIOS |
|
Award
AGP BIOS with enhanced ACPI, DMI, Green, Plug and Play Features |
|
Anti-boot
Virus BIOS |
|
1M-bit
Flash EPROM |
| Board
Size |
|
MicroATX
Form Factor PCB 21.6cm x 24.4cm(8.5" x 9.6") |
| Options |
|
IrDA
cable |
|
H/W
Monitor: Optional Winbond ASIC to support Fan Status Monitoring
and Alarm, CPU Voltage, System Temperature Monitoring and Alert. |
|
S/W
LanDesk Client Manager to Provides Total S/W & H/W Server or
Desktop Hardware Monitoring Solution. |
|
Retention
Mechanism & Heat Sink Support Brace. |